Wheel balancers

What type of wheel balancer should you choose?

Which wheel balancer suits your needs?

Is the quality of the wheel balancer good enough for workshop use?

These questions are just some of the questions we experience from our customers, and rightly so as it is extremely important that you as a user and customer buy exactly the wheel balancer that suits your needs. Jema Autolifte therefore has a much larger selection of different wheel balancers in our range than many of the other suppliers on the market.

 

Sort by:
Show:

Wheel balancer (DWC)

Basic line - The cheapest wheel balancer on the market! Balancing of steel and Alu rims 4 different size cones 4 various aluminum programs For the hobby workshop or semi...
✔ Electric connection 220V
✔ Rim diameter from 10" to 24"
✔ CE Approved

£673.00

Wheel balancer (DWC-2)

Basic line - Semi automatic wheel balancer! Balancing steel and alloy wheels 4 different cones 4 different alloy programs For the small or half-sized car workshop
✔ Semi-automatic
✔ Rim diameter from 10" to 24"
✔ CE Approved

£1,025.00

Wheel balancer (DWC-8-E)

Euro line - European produced wheel balancer! Balancing steel and alloy wheels 4 different size cones Several different aluminum programs For the semi-professional or the smaller car workshop
✔ Made in Europe
✔ Rim diameter from 10" to 30"
✔ CE Approved

£1,179.00

Wheel balancer (DWC-3)

Basic line - Semi automatic wheel balancer! Balancing steel and alloy wheels 4 different sizes cones 4 different alloy programs For the small or half-sized car workshop
✔ Semi-automatic
✔ Rim diameter from 10" to 24"
✔ CE Approved

£1,254.00

Wheel balancer (DWC-9-E)

Euro line - Semi automatic wheel balancer! Balacing steel and alloy wheels European produced Several different aluminum programs To the professional car repair shop
✔ Semi-Automatic - Made in Europe
✔ Rim diameter from 10" to 30"
✔ CE Approved

£1,659.00

Wheel balancer (DWC-10-E)

Euro line - Full automatic and laser pointer! ASUS 19,7" LCD-screen Automatic positioning lock 4 various aluminum programs To the professional car workshop
✔ Full-Automatic - Made in Europe
✔ Rim diameter from 10" to 30"
✔ CE Approved

£2,175.00

Wheel balancer (DWC-11-E)

Euro line - Full automatic, camera and laser pointer! 22" PRO touch screen Airpressure quicknut LOT-System (Laser On Top) To the professional car workshop
✔ Full-Automatic with camera - Made in Europe
✔ Rim diameter from 10" to 30"
✔ CE Approved

£4,775.00
Show:

The reason we have chosen to have, now, 7 different types of wheel balancers is to be able to meet our customers' demand. We have the completely cheap manual wheel balancer DWC, which is a good cheap quality wheel balancer that is most often used by the private user or the small car workshop. The wheel balancer is a manual wheel balancer that 100% works and balances your wheels to perfection, but all data input is done manually, ie. you measure the various parameters and then enter them manually via the keyboard on the wheel balancer. DWC has both a balancing program for steel rims, as well as 4 different ones for Alu. Programs for balancing aluminum rims. Furthermore, the wheel balancer also has the option of balancing motorcycle wheels if you as a user purchase a motorcycle adapter JA1002MA.

 

All our basic line wheel balancer is produced by the world's largest manufacturer of tire machines and wheel balancers, so the durability, design and ease of use of all wheel balancers are made with the user in mind. Based on the fact that we use the largest manufacturer in Asia, all our wheel balancers are in top quality in their price range, which means that it can be used by the price-conscious small as well as the large car workshop.

 

Jema Autolifte also has our two semi-automatic wheel balancer with product numbers DWC-2 and DWC-3. What is the difference between these two-wheel balancers?

Both the semi-automatic wheel balancers DWC-2 and DWC-3 have the same interface and user interface, the difference between these two-wheel balancers is simply the overview of the balancing, where the DWC-2 wheel balancer has a small LCD panel on the plastic top the wheel balancer DWC-3 an easier-to-understand LCD digital screen. There is no doubt that both wheel balancers work well and are extremely user-friendly, but it is up to the user whether the large LCD Digital screen is needed for exactly what you need it for. As written before, both wheel balancers are semi-automatic, which means that when the wheel balancers must be set in relation to wheel data, two of the wheel data input takes place automatically, by pulling the measuring arm out to the rim edge. inches, as well as the distance from the wheel balancer to the rim, the last data input needed to be able to balance the wheel is the width of the rim, and here you as a user use the included rim width gauge JA2002WC, and then enter it on the value B-Button by pressing the end + or - buttons, then you close the safety screen, and the balancing is in progress. When the wheel stops rotating, the balancing devices will show the imbalance values that you as a user must apply to the wheel both inside and outside the rim before the final measurement is made.

Both wheel balancers DWC-2 and DWC-3 have an ALU program called ALU-S, this program is quick and easy to use by pulling the measuring arm and placing it the two places you as a user want to place your adhesive balancing blocks, then find the wheel balancer itself out of the data it needs so you get the perfect balancing with the least use of balancing blocks.

All our basic line wheel balancers are extremely user-friendly, fantastic quality and very affordable.

In order to offer our customers what they want, we have also launched our Euro line series, which is always produced with the user in mind. All our wheel balancers in the Euro line series are European produced and are of extremely high quality and have a finish you would expect from the wheel balancers produced in Europe.

Jema Autolifte offers the completely manual wheel balancer DWC-8-E. This is a small compact wheel balancer that must have all data input manually which is done easily and quickly, a really good European-produced balancing device for the price.

Jema Autolifte also offers our semi-automatic wheel balancer DWC-9-E which is super user-friendly, and which easily and quickly shows the user what needs to be done for the wheel to be 100% balanced.

If you prefer a wheel balancer with laser pointer, we can also offer our fully automatic wheel balancer DWC-10-E which has all the functions to be used if you or your company balance a larger number of wheels.

Finally, we have our top wheel balancer DWC-11-E which is the fantastic choice. The wheel balancer DWC-11-E is equipped with a patented system with automatic wheel parameters IN-PUT based on the camera located in the tower. Wheel balancer DWC-11-E has LOT-System (Laser on Top) is an ultra-modern wheel balancer with even more accurate indication of the location of the balancing blocks.

The wheel balancer DWC-11-E is equipped with an air pressure Quick clamping and therefore significantly shortens your wheel mounting time and eliminates the risk of eccentric wheel mounting. The quick tension is controlled by a foot pedal. The DWC-11-E wheel balancer is equipped with a printer so that you as a user can show the customer the result of the balancing to the customer.

 

If you are in doubt about which of our quality wheel balancers devices to choose and what suits your needs, Jema Autolifte is always available to advise you or your workshop to choose the correct wheel balancer, please contact for a non-binding advice.